Cable Connector/Aerial bundled cable AES/Insulated Piercing Connector/ABC Accessories/PCT13 150-150

 PRODUCT DESCRIPTION:

PC T ab(B) x/y
PC = Piercing CONNECTOR
T = Tear head; B= BARE; a= bolt No.; b= outlet number; x= Max of main cond.; y= Max of Tap cond.

Purpose of Insulation piercing connectors(IPC) is to connect main and one(PC13),two(PC24) tap conducor's of section,how is written on IPC body.Type without letter B serves to connect isolated conductors,with letter B bare conductors.IPC for one tap conductor is equipped with cable termination cap PCEC16/120, for two output wires-no cap.

IPC consists from two glass-fiber reinforced plastic parts,which are fited with two brass tinned teeth's,which are coated with UV-curing silica grease and the teeth are fitted with rubber insulation.This set is associated with the bolt,nut and pinch fixation segment.The terminals marked T are equipped with tear head. The lower part of the clamp is designed to be hold by the key 17 and the ventilation chamber,providing optimal ventilation of IPC.

Product can be also used as tap connector inside low boltage boxes.

PRODUCT RANGE:

PCT13 120/70 RE/RM	isolated 16-120/ isolated 6-70 mm , Cu/Al
PCT13 150/150 RE/RM	isolated 6-150/ isolated 6-150 mm , Cu/Al
PCT14 150/150 RE/RM	isolated 6-150/ isolated 6-150 mm , Cu/Al

 

USED MATERIALS:
UV&fire resistant PA66,PVC,dacromet or H.D.G(optional)finished steel,tinned copper.

PACKING:
100pcs per carton.
G.W: 220 g/pc.
N.W: 210 g/p.c

STORANGE AND TRANSPORT:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.